Sony Bloggie 3D Player Main Button's Circuit Board Replacement
Robert Tam and 8 other contributors
Last updated on May 7, 2024
Views: 743
View statistics:
- Past 24 Hours:
- 0
- Past 7 Days:
- 8
- Past 30 Days:
- 21
- All Time:
- 743
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 1 2
1 person has favorited (and subscribed to) this guide. Will you be next?
2 people have favorited (and subscribed to) this guide — including you!
Introduction
Go to step 1 ↓Whether it's due to dust, wear, or physical damage, the main button circuit board may need to be replaced at some point. This guide focuses on how to install a new main button circuit board to get your Sony Bloggie 3D Player running like new.
What you need
Tools
-
-
-
Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.
Ask FixBot
-
-
-
Use a plastic opening tool to pry the cover open.
-
After the the cover is partly open as shown, remove the cover with your hands.
-
-
-
-
-
Tool used on this step:Tweezers$4.99
-
Detach the board from the ZIF connector using a pair of tweezers or by hand.
-
Flip the circuit board over and remove the connector on the backside. Now you can safely remove the circuit board.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
Cal Poly, Team 7-12, Maness Winter 2013 Member of Cal Poly, Team 7-12, Maness Winter 2013
CPSU-MANESS-W13S7G12
5 Members
72 Guides authored
