Introduction
This is a prerequisite for the other Sonos Play 1 guides.
What you need
-
-
Remove the rubber footing from the bottom of the device. Pry it up from one end using one of the plastic opening tools.
-
Once you pry open one end, use precision tweezers to remove rubber footing.
-
-
-
-
Remove the four 9 mm Torx Security #9 head screws. There are two on each side.
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.