Shark Pet Perfect II Front Belt Replacement

You're viewing a previously published version of this guide. View latest version

Oct 15, 2017 - 02:55:22

Oct 15, 2017 - 02:55:22 Oct 15, 2017 - 02:55:21 Oct 15, 2017 - 02:54:59 Aug 15, 2017 - 09:59:14 Aug 15, 2017 - 09:57:57 Aug 15, 2017 - 09:52:47 Aug 15, 2017 - 09:50:57 Aug 15, 2017 - 09:43:23 Aug 15, 2017 - 09:28:59 Aug 08, 2017 - 04:09:16 Aug 08, 2017 - 03:57:36 Aug 08, 2017 - 03:57:18 Aug 08, 2017 - 03:57:06 Aug 08, 2017 - 03:56:56 Aug 08, 2017 - 03:56:51 Aug 08, 2017 - 03:56:40 Aug 08, 2017 - 01:05:55 Aug 08, 2017 - 01:05:29 Aug 08, 2017 - 12:58:48 Aug 08, 2017 - 12:52:20 Aug 08, 2017 - 12:51:37 Aug 08, 2017 - 12:50:20 Aug 08, 2017 - 12:49:48 Aug 02, 2017 - 08:21:40 Aug 02, 2017 - 08:21:19 Aug 02, 2017 - 08:20:49 Aug 02, 2017 - 02:57:17 Aug 02, 2017 - 02:26:58 Aug 02, 2017 - 02:26:01 Aug 02, 2017 - 02:25:02 Aug 02, 2017 - 02:23:58 Aug 02, 2017 - 02:23:16 Aug 02, 2017 - 02:22:50 Aug 02, 2017 - 02:22:06 Aug 02, 2017 - 02:21:04 Aug 02, 2017 - 02:17:20 Aug 02, 2017 - 02:14:56 Aug 02, 2017 - 02:14:53 Aug 02, 2017 - 02:14:08

Newer

Introduction

Step by step guide on replacing the internal brush rotation belt. After removing a few screws, you can access the internal components of the motorized brush. After removing the belt, you should exercise care in handling the belt.

What you need

Step 1 Front Belt

Shark Pet Perfect II Front Belt Replacement, Front Belt: step 1, image 1 of 1

Remove the motorized brush from the dust cup by pulling it apart.

Step 2

Use a Phillips #1 screwdriver to remove the five 14mm screws from the face of the motorized brush.

Step 3

Separate the motorized brush face plate by using a flat prying tool.

Step 4

Shark Pet Perfect II Front Belt Replacement: step 4, image 3 of 3

Remove the brush roller by lifting vertically away from the brush head. It should come out easily along with the belt.
Be careful in handling the belt. If stretched or damaged, the belt can cause the motorized brush to operate incorrectly.