Skip to main content

Shark Navigator Lightweight Upright Dust Cup Replacement

  1. Shark Navigator Lightweight Upright Dust Cup Replacement, Dust Cup: step 1, image 1 of 2 Shark Navigator Lightweight Upright Dust Cup Replacement, Dust Cup: step 1, image 2 of 2
    • Press down on the black, rubber ballish button located on the top of the vacuum.

    • Pull back simultaneous on the plastic handle and remove the dust container.

  2. Shark Navigator Lightweight Upright Dust Cup Replacement: step 2, image 1 of 3 Shark Navigator Lightweight Upright Dust Cup Replacement: step 2, image 2 of 3 Shark Navigator Lightweight Upright Dust Cup Replacement: step 2, image 3 of 3
    • Press the plastic tab in, located on the front of the dust container.

    • Pull up simultaneously on the plastic handle.

  3. Shark Navigator Lightweight Upright Dust Cup Replacement: step 3, image 1 of 2 Shark Navigator Lightweight Upright Dust Cup Replacement: step 3, image 2 of 2
    • Remove the dust cup from the inside of the dust container.

  4. Shark Navigator Lightweight Upright Dust Cup Replacement: step 4, image 1 of 3 Shark Navigator Lightweight Upright Dust Cup Replacement: step 4, image 2 of 3 Shark Navigator Lightweight Upright Dust Cup Replacement: step 4, image 3 of 3
    • Push in the red tab located on the side of the dust cup.

    • Open the dust cup simultaneously with the cone-half pointing downwards.

    • Separate the two halves.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kahye Yu

Member since: 10/02/17

446 Reputation

2 Guides authored

Team

Cal Poly, Team S4-G6, Livingston Fall 2017 Member of Cal Poly, Team S4-G6, Livingston Fall 2017

CPSU-LIVINGSTON-F17S4G6

3 Members

12 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 23

Past 30 Days: 88

All Time: 3,242