Skip to main content

Tools

No tools specified.

Parts

  1. Shark Navigator Filter Replacement, Filter: step 1, image 1 of 3 Shark Navigator Filter Replacement, Filter: step 1, image 2 of 3 Shark Navigator Filter Replacement, Filter: step 1, image 3 of 3
    • First unclip the dust canister from the body of the vacuum by lifting up the grey tabs on either side of the canister.

  2. Shark Navigator Filter Replacement: step 2, image 1 of 1
    • At the base of the vacuum will be a large plush filter. This is one of two filters in this compartment. Take this filter out.

  3. Shark Navigator Filter Replacement: step 3, image 1 of 1
    • The second filter is thinner and lies at the base of the vacuum. Replace this filter first before placing the larger replacement filter on top of it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

8 other people completed this guide.

Mara

Member since: 03/27/2015

469 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 7

Past 7 Days: 51

Past 30 Days: 245

All Time: 21,953