Sennheiser RS120 Replace Batteries

Member-Contributed Guide

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Replacing worn-out the rechargeable batteries in the wireless headphones.

  • Author: Gayle Dunham
  • Time required: 2 minutes
  • Difficulty: Very easy

The rechargeable batteries are located behind the left ear cushion. Remove the ear cushion by rotating a quarter turn counter clockwise.

Ear cushions The ear cushions are secured to the earcups by means of a quarter turn fastener. To remove an ear cushion, turn it in the direction of the arrow until you overcome a slight resistance and lift it off the earcup.

Rechargeable batteries

Attention: Only use re-chargeable batteries, never use standard batteries! Insert the rechargeable batteries. Charge the batteries for at least 24 hours prior to first time use. Subsequent charging time is approx. 18 hours per charge. Place the headphones on the charging cradle of the transmitter. The red LED lights up, indicating that the batteries are being charged. The LED remains lit even when the rechargeable batteries are fully charged. The unit has overcharging protection.

Nearly discharged batteries will significantly reduce the sound quality.

Relevant Parts

Edit Step 1 Sennheiser RS120 Replace Batteries  ¶ 

Image #1

Edit Step 1 Sennheiser RS120 Replace Batteries  ¶ 

  • It's just that simple.

To reassemble your device, follow these instructions in reverse order.

For more information, check out the Sennheiser RS120 device page.

Popular Products

54 Bit Driver Kit

$29.95 · 50+ In stock

TR8 Torx Security Screwdriver

$9.95 · 11 In stock

Precision Tweezers Set

$14.95 · 50+ In stock

Pro Tech Toolkit

$64.95 · 50+ In stock

Comments Comments are onturn off

Thanks for the information - this made changing the batteries a snap.

Jim K, · Reply

Extremely helpful. Thank you!

-Randy N

Randy, · Reply

View Statistics:

Past 24 Hours: 13

Past 7 Days: 103

Past 30 Days: 409

All Time: 17,446