Skip to main content

Sanyo Katana Screen Protector Replacement

What you need

  1. Sanyo Katana Screen Protector Replacement, Screen Protector: step 1, image 1 of 2 Sanyo Katana Screen Protector Replacement, Screen Protector: step 1, image 2 of 2
    • With the flat end of a spudger, remove the plastic covers located on the corners of the display near the hinge and above the screen, revealing four screws underneath.

  2. Sanyo Katana Screen Protector Replacement: step 2, image 1 of 2 Sanyo Katana Screen Protector Replacement: step 2, image 2 of 2
    • Remove the 4.4mm screw in each corner using the Tri-wing Y0 screwdriver.

  3. Sanyo Katana Screen Protector Replacement: step 3, image 1 of 2 Sanyo Katana Screen Protector Replacement: step 3, image 2 of 2
    • Carefully pry the screen protector off the phone using the flat end of the spudger.

    • This will require a bit of force as the back of the screen protector is lined with an adhesive material.

    • Once free from the adhesive, pull the screen protector away from the phone.

StephenYH

Member since: 03/11/13

20 Reputation

3 Guides authored

Team

Clemson, Team 12-1, Benson Spring 2013 Member of Clemson, Team 12-1, Benson Spring 2013

CLEM-BENSON-S13S12G1

4 Members

20 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 306