Introduction

This guide will illustrate for you how to replace the battery from a Sanyo Katana Eclipse X.

Parts

No parts required.

  1. Press the battery release button located on the back of the phone.
    • Press the battery release button located on the back of the phone.

    • With the button depressed, pull down on the battery protector to remove it from the phone.

      • The phone's battery will now be exposed.

    Add Comment

  2. Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.
    • Slide a thin object under the white tab located on the bottom of the battery and carefully lift away from the phone.

      • A small, flat-tip screwdriver or credit card may be helpful for this step.

    • The battery should now be free of the phone.

    Add Comment

    • Align the copper receptors on the back of your battery so the phone's copper receptors are touching the battery terminals.

      • Refer to photo illustrations.

    • Using your thumb, apply gentle pressure to the battery until it clicks into place.

    Add Comment

    • Take the phone’s back casing and set it over the battery.

    • Apply gentle pressure, pushing towards the top of the phone until your hear a click.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Thomas Scaggs

Member since: 10/15/2012

209 Reputation

2 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 249