Samsung UBD KM85C Outer Shell Replacement

You're viewing a previously published version of this guide. View latest version

Apr 20, 2018 - 03:48:32

Apr 20, 2018 - 03:48:32 Apr 20, 2018 - 03:48:30 Apr 20, 2018 - 03:48:23 Apr 20, 2018 - 03:47:56 Apr 03, 2018 - 09:04:43 Apr 03, 2018 - 09:00:20 Apr 03, 2018 - 08:59:34 Apr 02, 2018 - 10:29:29 Apr 02, 2018 - 10:22:58 Mar 27, 2018 - 02:11:38 Mar 27, 2018 - 02:08:44 Mar 27, 2018 - 01:50:54 Mar 27, 2018 - 01:48:32 Mar 27, 2018 - 01:47:55 Mar 22, 2018 - 02:32:30 Mar 22, 2018 - 02:27:17 Mar 22, 2018 - 02:25:05 Mar 22, 2018 - 02:24:09 Mar 22, 2018 - 02:14:09 Mar 22, 2018 - 02:09:47 Mar 22, 2018 - 02:02:33 Mar 22, 2018 - 01:47:49

Newer

What you need

Step 1 Outer Shell

Samsung UBD KM85C Outer Shell Replacement, Outer Shell: step 1, image 1 of 1

On the back side of the unit, remove the three 8.1mm screws marked with a Phillips #1 screwdriver.

Step 2

From the back, lift the case upwards away from the unit then forwards, releasing the prongs on the front.

Step 3

Samsung UBD KM85C Outer Shell Replacement: step 3, image 3 of 3

There is one group of wires located towards the front of the case and attached directly to the motherboard and the case. Using two fingers in a pinching motion, release the wire from the clip and disconnect it.