Fix Your Stuff Community Store

Samsung SCV-VLUUST50 Flash Bulb Replacement

Introduction

The replacement of this flash light bulb will be needed when flash mode isn't working.

What you need

  1. Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: step 1, image 1 of 3 Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: step 1, image 2 of 3 Samsung SCV-VLUUST50 Flash Bulb Replacement, Cover: step 1, image 3 of 3

    • Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

    • Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

    Edit

  2. Samsung SCV-VLUUST50 Flash Bulb Replacement: step 2, image 1 of 3 Samsung SCV-VLUUST50 Flash Bulb Replacement: step 2, image 2 of 3 Samsung SCV-VLUUST50 Flash Bulb Replacement: step 2, image 3 of 3

    • Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

    • Remove the corner panel by applying pressure away from the shutter button.

    • The memory card cover will come off with the corner panel.

    • Remove the top panel by applying gentle pressure away from the shutter button.

    Edit

  3. Samsung SCV-VLUUST50 Flash Bulb Replacement: step 3, image 1 of 1

    • Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

    Edit

  5. Samsung SCV-VLUUST50 Flash Bulb Replacement: step 4, image 1 of 2 Samsung SCV-VLUUST50 Flash Bulb Replacement: step 4, image 2 of 2

    • Remove the front and back covers by pulling them straight apart.

    Edit

  6. Samsung SCV-VLUUST50 Flash Bulb Replacement, Flash Bulb: step 5, image 1 of 2 Samsung SCV-VLUUST50 Flash Bulb Replacement, Flash Bulb: step 5, image 2 of 2

    • Remove the screw securing the shutter button to the camera frame.

    • Lift the shutter button to remove it.

    Edit

  7. Samsung SCV-VLUUST50 Flash Bulb Replacement: step 6, image 1 of 2 Samsung SCV-VLUUST50 Flash Bulb Replacement: step 6, image 2 of 2

    • Remove the screws from the circuitry with a Phillips #000 driver.

    • Remove the screw connecting the flash housing to the camera frame with the same driver.

    Edit

  8. Samsung SCV-VLUUST50 Flash Bulb Replacement: step 7, image 1 of 2 Samsung SCV-VLUUST50 Flash Bulb Replacement: step 7, image 2 of 2

    • Pull the flash housing away from the camera frame.

    • Cut the wires connecting the flash module to the circuitry.

    • Connect the new flash module to the circuitry with a soldering iron and electrical solder.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 135