Introduction

Gain power and a longer battery life by replacing the POWERbot's battery. Replacing your POWERbot's battery can resolve the C 11 error code.

Parts

No parts required.

  1. Turn the emergency switch off.
    • Turn the emergency switch off.

  2. Remove the two exposed screws on the top right of the device. Remove the two exposed screws on the top right of the device.
    • Remove the two exposed screws on the top right of the device.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Lift the cover plate to expose the battery.
    • Lift the cover plate to expose the battery.

  5. Using one hand, pinch the white plastic connector where the battery's wiring connects the POWERbot.  Pull up to disconnect. Using one hand, pinch the white plastic connector where the battery's wiring connects the POWERbot.  Pull up to disconnect.
    • Using one hand, pinch the white plastic connector where the battery's wiring connects the POWERbot. Pull up to disconnect.

  6. Lift the battery from the right side, up and out of its compartment. Lift the battery from the right side, up and out of its compartment.
    • Lift the battery from the right side, up and out of its compartment.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lauren Nubla

Member since: 09/11/2017

207 Reputation

2 Guides authored

Team

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 11

Past 30 Days: 60

All Time: 971