Introduction

This guide helps users to replace the Wifi card successfully by following these easy steps.

Parts

No parts required.

Flip over the laptop so you are facing the backside.
  • Flip over the laptop so you are facing the backside.

Add Comment

Look for the compartment with the Wifi symbol on it. Using the Phillips #1 screwdriver remove the  M2.5X5 screw, located beside the Wifi Symbol. Using the plastic spudger, carefully pry the Wifi panel off.
  • Look for the compartment with the Wifi symbol on it.

  • Using the Phillips #1 screwdriver remove the M2.5X5 screw, located beside the Wifi Symbol.

  • Using the plastic spudger, carefully pry the Wifi panel off.

Add Comment

New Battery = Faster iPhone
Fix Kits starting at $16.99
Gently remove the two wires attached to the the Wifi card by using the plastic spudger to pry from underneath the attachment points. Using the #2 Phillips screwdriver, remove the M2.5X3 mm screw holding in the Wifi card
  • Gently remove the two wires attached to the the Wifi card by using the plastic spudger to pry from underneath the attachment points.

  • Using the #2 Phillips screwdriver, remove the M2.5X3 mm screw holding in the Wifi card

Add Comment

Using you hand, gently pull out the Wifi card. Using you hand, gently pull out the Wifi card.
  • Using you hand, gently pull out the Wifi card.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 14

All Time: 87