Skip to main content

Fix Your Stuff

Right to Repair

Store

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

How to remove & replace the phone's back cover.

Parts

No parts specified.

  1. Orient the phone with the screen facing down.
    • Orient the phone with the screen facing down.

    • Using your thumb, slide the back panel away from the camera to expose the battery.

  2. Grip the battery on its sides, opposite the direction of the white arrow. Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.
    • Grip the battery on its sides, opposite the direction of the white arrow.

    • Pry the battery up. It will pivot at the end with the white arrow. The battery will now be free.

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Shop Kits

    Enough RAM
    For All The Tabs

    Shop Kits
  4. Remove the 6 outer screws.
    • Remove the 6 outer screws.

    • The screws should be 3.5 mm in length.

    • Put the screws in a safe place as they are very small and easy to lose.

  5. Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.
    • Snap off back the cover by gently prying around the top and bottom edges with a flat head screwdriver.

    • It may help to slide the touchscreen upwards when removing the back panel.

    • The side buttons will become loose and are prone to fall out, so put these in a safe place.

Saul Villatoro

Member since: 04/25/2011

255 Reputation

7 Guides authored

Team

Cal Poly, Team 8-10, Regan Spring 2011 Member of Cal Poly, Team 8-10, Regan Spring 2011

CPSU-REGAN-S11S8G10

4 Members

22 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,565