Image 1/2: Take your screwdriver and start to unscrew the screws highlighted in picture 1. Image 2/2: Take your screwdriver and start to unscrew the screws highlighted in picture 1.
  • Flip open the phone as shown in picture 1.

  • Take your screwdriver and start to unscrew the screws highlighted in picture 1.

Add Comment

Image 1/1: Once the spudger is successfully wedged in between these two pieces, circle the frame of the phone.
  • Take your spudger and forcefully insert it between the black and silver part of the phone.

  • Once the spudger is successfully wedged in between these two pieces, circle the frame of the phone.

Add Comment

Image 1/2: The highlighted sections correspond to the bullet colors. To replace either simply disconnect the wires attached, and lift the piece off. Image 2/2: Speaker Component
  • The phone should be exposed like picture 1 once the case was removed.

  • The highlighted sections correspond to the bullet colors. To replace either simply disconnect the wires attached, and lift the piece off.

  • Speaker Component

  • Vibration Component

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michael Huang

Member since: 03/30/2015

301 Reputation

3 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 9

All Time: 213