Skip to main content

Introduction

This guide will list all required steps to properly replace the batteries in the back of the Samsung Gear VR's controller. The controller is powered by two AAA batteries. No tools are required for this replacement.

  1. Turn the controller upside down to access the battery compartment. The battery compartment is located on the opposite side of the buttons. Press on the top of the battery plate and slide down to remove the cover.
    • Turn the controller upside down to access the battery compartment.

    • The battery compartment is located on the opposite side of the buttons.

    • Press on the top of the battery plate and slide down to remove the cover.

  2. Remove the AAA batteries using your fingers. Remove the AAA batteries using your fingers. Remove the AAA batteries using your fingers.
    • Remove the AAA batteries using your fingers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Luke Moravitz

Member since: 01/24/2019

94 Reputation

1 Guide authored

Team

Cal Poly, Team S18-G3, White Winter 2019 Member of Cal Poly, Team S18-G3, White Winter 2019

CPSU-WHITE-W19S18G3

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 16

All Time: 705