What you need
-
-
Place your thumbs on the ends of the screen.
-
Push the watch outward while pulling the band away from the watch.
-
-
-
Use a hair dryer, heat gun, or an iOpener to heat the Gear Fit for 1-2 minutes until it is hot to the touch.
-
-
-
-
Using tweezers as a lever, pry the inner assembly out of the external casing.
-
This will be harder than removing the screen. Moderate force may be required.
-
-
-
Disconnect the ribbon cables connecting the screen to the motherboard by lifting their metal connectors up off of the board with tweezers.
-