Introduction

If one or both speakers on your tablet are not working properly, this guide will walk you through how to easily replace them.

Begin by separating the back panel from the screen glass assembly using the plastic opening tool.
  • Begin by separating the back panel from the screen glass assembly using the plastic opening tool.

Continue around the entire device until the back panel is completely separated from the screen. Continue around the entire device until the back panel is completely separated from the screen.
  • Continue around the entire device until the back panel is completely separated from the screen.

Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on the top part of the speaker. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on the top part of the speaker. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on the top part of the speaker.
  • Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on the top part of the speaker.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Using your fingers, carefully remove the tab that connects the speaker to the motherboard. Using your fingers, carefully remove the tab that connects the speaker to the motherboard.
  • Using your fingers, carefully remove the tab that connects the speaker to the motherboard.

Using your fingers, gently remove the speaker from its place. Using your fingers, gently remove the speaker from its place. Using your fingers, gently remove the speaker from its place.
  • Using your fingers, gently remove the speaker from its place.

Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on top of the speaker. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on top of the speaker. Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on top of the speaker.
  • Use a Phillips #000 screwdriver to remove the 2.5mm Phillips head screw on top of the speaker.

Using your fingers, lift the tab that connects the speaker to the mother board. Using your fingers, lift the tab that connects the speaker to the mother board.
  • Using your fingers, lift the tab that connects the speaker to the mother board.

Using a nylon spudger, gently lift the round piece that connects to the speaker and remove it from its place.
  • Using a nylon spudger, gently lift the round piece that connects to the speaker and remove it from its place.

Using your fingers, gently remove the speaker from its place. Using your fingers, gently remove the speaker from its place.
  • Using your fingers, gently remove the speaker from its place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mario Montoya

Member since: 09/12/2016

225 Reputation

2 Guides authored

Team

USF Tampa, Team 9-2, Lacy Fall 2016 Member of USF Tampa, Team 9-2, Lacy Fall 2016

USFT-LACY-F16S9G2

4 Members

5 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 17

All Time: 261