Introduction

This guide will show how to replace the rear facing camera on the Samsung Galaxy Tab Pro 10.1.

  1. Be gentle, the front panel is connected to sensitive wiring that may snap if too much pressure is applied. Insert a plastic opening tool into the crevice between the screen and the side of the tablet.
    • Be gentle, the front panel is connected to sensitive wiring that may snap if too much pressure is applied.

    • Insert a plastic opening tool into the crevice between the screen and the side of the tablet.

    • Go around the entire crevice with the plastic opening tool.

    • Set aside the separated front and rear panels of the device.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Use plastic tweezers and carefully detach the rear-facing camera from the motherboard. Use plastic tweezers and carefully detach the rear-facing camera from the motherboard. Use plastic tweezers and carefully detach the rear-facing camera from the motherboard.
    • Use plastic tweezers and carefully detach the rear-facing camera from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Stephen Yeung

Member since: 08/26/2015

1,211 Reputation

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 9

All Time: 464