Fix Your Stuff Community Store

Samsung Galaxy Tab Pro 10.1 Battery Cable Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prerequisite Only

What you need

  1. Samsung Galaxy Tab Pro 10.1 Battery Cable Replacement, Battery Cables: step 1, image 1 of 2 Samsung Galaxy Tab Pro 10.1 Battery Cable Replacement, Battery Cables: step 1, image 2 of 2

    • Remove the six 4 mm Phillips #00 screws that hold the battery in place.

    Edit

  3. Samsung Galaxy Tab Pro 10.1 Battery Cable Replacement: step 2, image 1 of 3 Samsung Galaxy Tab Pro 10.1 Battery Cable Replacement: step 2, image 2 of 3 Samsung Galaxy Tab Pro 10.1 Battery Cable Replacement: step 2, image 3 of 3

    • Remove the tape that runs along the length of the battery.

    • Lift the retaining flaps of the ZIF connectors on each side of the battery connector.

    • Remove the two ribbon cables that lay across the width of the battery and are connected to the motherboard. Place your finger underneath the ribbon cable and gently lift the cable upwards and off.

    Edit

  4. Samsung Galaxy Tab Pro 10.1 Battery Cable Replacement: step 3, image 1 of 2 Samsung Galaxy Tab Pro 10.1 Battery Cable Replacement: step 3, image 2 of 2

    • Use a plastic tweezer and remove the top center 6 pin power connector that is attached to the edge of the motherboard.

    • Detach the battery by gently lifting the battery out of the panel.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Stephen Yeung

Member since: 08/26/15

1,526 Reputation

6 Guides authored

Badges: 20

+17 more badges

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 107