Introduction
Here's a video from a Spanish technician that shows the relatively simple process of replacing a digitizer for a Galaxy Tab 4 7". The video has no narration and is easy to understand without knowing spanish.
What you need
Video Instructions
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
21 other people completed this guide.
4 Comments
Here is a replacement digitizer, Also they offer tools to help in the replacement process. http://www.amazon.com/gp/product/B00MFC4...
Cody - Reply
So this is a no fused/LOCA display? I thought these were fused. Can anyone confirm deny
Sam Garesche - Reply
they are fused.
Rob - Reply
So, I did this repair and it was relatively straight forward. If I had to give one word of advice to anyone attempting this repair it is to remove the micro SD card before starting as I destroyed mine when trying to pry open the case. The other word of advice I have is be careful with the small little wifi piece. I had no problems with this but I can imagine severing it or closing it in the case. Overall an easy repair. I can always order another SD card and did not lose anything important but to others this can cause a loss of something sentimental.
Christopher Butera - Reply