Introduction

Here's a video from a Spanish technician that shows the relatively simple process of replacing a digitizer for a Galaxy Tab 4 7". The video has no narration and is easy to understand without knowing spanish.

Video Instructions

Conclusion

To reassemble your device, follow these instructions in reverse order.

17 other people completed this guide.

Max B

Member since: 06/13/2014

190 Reputation

1 Guide authored

4 Comments

Here is a replacement digitizer, Also they offer tools to help in the replacement process. http://www.amazon.com/gp/product/B00MFC4...

Cody - Reply

So this is a no fused/LOCA display? I thought these were fused. Can anyone confirm deny

Sam Garesche - Reply

they are fused.

Rob - Reply

So, I did this repair and it was relatively straight forward. If I had to give one word of advice to anyone attempting this repair it is to remove the micro SD card before starting as I destroyed mine when trying to pry open the case. The other word of advice I have is be careful with the small little wifi piece. I had no problems with this but I can imagine severing it or closing it in the case. Overall an easy repair. I can always order another SD card and did not lose anything important but to others this can cause a loss of something sentimental.

Christopher Butera - Reply

Add Comment

View Statistics:

Past 24 Hours: 8

Past 7 Days: 63

Past 30 Days: 278

All Time: 15,484