Introduction
If your tablet has a broken touch screen glass (digitizer), LCD display or you want to chang the micro USB charging port, loudspeakers, audio jack connector, etc., with this guide we will help you to do it.
What you need
Video Overview
-
-
Put the scotch tape in order not to scatter pieces of glass.
-
Remove any memory card and SIM card (if the tablet is 3G version).
-
-
-
Remove the two screws and disconnect the charging port flex cable from the main board.
-
Use a plastic tool to unstick the flex cable from the middle frame.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
18 other people completed this guide.
One Comment
Awesome guide, was so easy to replace complete LCD digitiser and glass all in one unit.