Introduction

Samsung has used the same screws in all mobile phone from the S3 - S5 models including the minis. The S6 series brought about new screws and if mixed up screws in too far and causes damage.

3.2mm S6 / S6 Edge & S7 series screws are 3.2mm.
  • 3.2mm S6 / S6 Edge & S7 series screws are 3.2mm.

Add Comment

S3, S4,  S5  screws are 3.8mm, an extra 0.6mm over the S6 and S7 series.
  • S3, S4, S5 screws are 3.8mm, an extra 0.6mm over the S6 and S7 series.

Add Comment

Using 3.8mm screw around edges S6 / S7 Edge will cause damage to the LCD as per photo. Only ever use 3.2mm phillips head screws on S6 and  S7 screen replacements.
  • Using 3.8mm screw around edges S6 / S7 Edge will cause damage to the LCD as per photo. Only ever use 3.2mm phillips head screws on S6 and S7 screen replacements.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

17 other people completed this guide.

Nick Kane

Member since: 02/20/2015

665 Reputation

1 Guide authored

Team

SmashedIT Member of SmashedIT

Business

3 Members

1 Guide authored

One Comment

Some of the screws in my S6 seem to be even shorter than 3.2 mm . Is that right? And in which holes do those fit? I think I mixed them up...

jellemaris - Reply

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 41

Past 30 Days: 191

All Time: 3,814