Introduction

Use this guide to replace a damaged rear case on your Samsung Galaxy S4.

  1. Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button.
    • Pry with a plastic opening tool, or your fingernail, in the divot to the left of the rear-facing camera, near the power button.

    I snapped the back cover sorry m8

    Daniel Anishchenko - Reply

    I purchased a blue plastic opening tool(AKA: Spudge) like the one used in the above pic and found the divot and was able to take off the rear cover as per the “Step 1 rear cover” instructions.

    Terry Crawford, Jr. - Reply

  2. Lift the rear case by the corner nearest the divot and remove it from the phone.
    • Lift the rear case by the corner nearest the divot and remove it from the phone.

    Where is the divot? Please let me know that

    James - Reply

    I purchased a blue plastic opening tool(AKA: Spudge) like the one used in the above Step 1 rear cover pic and found the divot and was able to take off the rear cover as per the “Step 2 “ instructions.

    Terry Crawford, Jr. - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

24 other people completed this guide.

Sam Lionheart

Member since: 10/18/2012

341,156 Reputation

535 Guides authored

Team

iFixit Member of iFixit

Community

114 Members

7,024 Guides authored

One Comment

Powerful guide.

Albert Einstein - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 39

All Time: 10,020