Samsung Galaxy S III Rear Case Replacement

Step 1 Rear Case



• The following four steps can be accomplished without a plastic opening tool. However, it's recommended to use a tool to best avoid breaking any clips along the perimeter of the rear case.
• Insert a plastic opening tool or fingernail into the notch in the gap between the rear case and the rest of the phone, located at the top of the device.
• Gently twist the opening tool to disconnect the clips securing the top of the rear case.
Step 2



• Slide the plastic opening tool left along the top edge and repeat the twisting motion to widen the gap between the rear case and the phone.
Step 3
• Continue to move the plastic opening tool around the perimeter of the top left corner, gently prying up along the rear case.
Step 4
• Pry along the top right side, and continue prying down the right side of the rear case.
Step 5
• Lift up and remove the rear case from the phone.
• You may need to peel the case up to separate it from any clips still holding it to the bottom of the phone.

Author

with 6 other contributors

Walter Galan

694,573 Reputation

1,203 Guides authored

Badges: 54

• 
• 
• 

+51 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview