Introduction

First off

If you don't know what we are doing from reading the title, I'm afraid your a little in over your head.

As for the rest of us, lace up and lets get ready for some football. By football I mean prepare to break down the Galaxy Mega front LCD Assembly and replace it with a better looking one.

Video Overview

Image 1/2: Flip the phone over to remove the batter door and battery. Image 2/2: Flip the phone over to remove the batter door and battery.
  • bold textWith a heavily shattered screen lay some tape over it to protect yourself and to keep it all in one place.

  • Flip the phone over to remove the batter door and battery.

Add Comment

Image 1/2: Using your pry tool slowly pop the speaker companant off.'''being careful not to damage it''' Image 2/2: Using your pry tool slowly pop the speaker companant off.'''being careful not to damage it'''
  • With a phillips remove all 14 visibile screws.

  • Using your pry tool slowly pop the speaker companant off.being careful not to damage it

Add Comment

Image 1/3: the frame can be deceiving and seem as if it attached closer to the top but in the picture you will see down to the middle is where you should look to separate. Image 2/3: Fully remove the rear assembly frame from the main device. Image 3/3: Fully remove the rear assembly frame from the main device.
  • Using the pry tool work your way arounf the phone, separating the rear assembly frame from the device.

  • the frame can be deceiving and seem as if it attached closer to the top but in the picture you will see down to the middle is where you should look to separate.

  • Fully remove the rear assembly frame from the main device.

Add Comment

Image 1/3: Next with a phillips screwdriver remove the one screw holding the protection plate over the cameras, Image 2/3: Proceed to remove the front camera Image 3/3: Proceed to remove the front camera
  • Using a spudger or pry tool lift remove the LCD flex cable from the logic board.

  • Next with a phillips screwdriver remove the one screw holding the protection plate over the cameras,

  • Proceed to remove the front camera

Add Comment

Image 1/3: With atleast 3 guitar pick keeping separation as you progress the screen should slowly start lifting off. Image 2/3: leave the bottom area for last and be careful with your tools to not damage the back cable. Image 3/3: leave the bottom area for last and be careful with your tools to not damage the back cable.
  • With your heat hun slowly heat the screen while using pry tool to work your wau around the device.

  • With atleast 3 guitar pick keeping separation as you progress the screen should slowly start lifting off.

  • leave the bottom area for last and be careful with your tools to not damage the back cable.

Add Comment

Image 1/1:
  • Clean device then follow the steps in reverse.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Austin Pollard

Member since: 02/05/2017

439 Reputation

3 Guides authored

Team

Reno Phone Repair Member of Reno Phone Repair

Business

1 Member

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 7

Past 30 Days: 18

All Time: 49