Parts

No parts required.

Image 1/3: Remove the DVD tray faceplate by pushing the faceplate up off of the tray. Image 2/3: Remove the DVD tray faceplate by pushing the faceplate up off of the tray. Image 3/3: Remove the DVD tray faceplate by pushing the faceplate up off of the tray.
  • Open the tray by pressing the eject button

  • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

Add Comment

Image 1/1: After the tray is closed unplug DVD player
  • Press the eject button to insert the tray

  • After the tray is closed unplug DVD player

Add Comment

Image 1/1:
  • Unscrew the 3 screws in the back.

Add Comment

Image 1/2: Image 2/2:
  • Pull the outer case upward and then towards you.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

Add Comment

Image 1/2: Image 2/2:
  • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

Add Comment

Image 1/3: Grasp clip and squeeze to release Image 2/3: Lift up and remove power cord Image 3/3: Slide cord mount from outer case
  • Locate the white clip that attaches the cord to the motherboard

  • Grasp clip and squeeze to release

  • Lift up and remove power cord

  • Slide cord mount from outer case

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Evan Domingue

Member since: 01/28/2011

377 Reputation

3 Guides authored

Team

Cal Poly, Team 3-30, Regan Winter 2011 Member of Cal Poly, Team 3-30, Regan Winter 2011

CPSU-REGAN-W11S3G30

4 Members

8 Guides authored

One Comment

where can I get a replacement cord?

Bill Cavanaugh - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 25

All Time: 2,496