Skip to main content

Introduction

The Blu-Ray Player will be opened and the power cord removed.

  1. Use the Phillips Head #2 screwdriver to remove the three 10mm screws on the back panel.
    • Use the Phillips Head #2 screwdriver to remove the three 10mm screws on the back panel.

  2. Use the plastic spudger to pry open the top panel. Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel. Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.
    • Use the plastic spudger to pry open the top panel.

    • Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.

  3. PC Laptop Batteries

    An easy fix for a big power boost.

    Shop Now

    PC Laptop Batteries

    An easy fix for a big power boost.

    Shop Now
  4. Pull the ribbons gently from one corner by the blue tabs to remove it. Pull the ribbons gently from one corner by the blue tabs to remove it.
    • Pull the ribbons gently from one corner by the blue tabs to remove it.

  5. Use a Phillips Head #2 to remove the two 7.5mm screws on the black cover.
    • Use a Phillips Head #2 to remove the two 7.5mm screws on the black cover.

  6. Remove the black cover.
    • Remove the black cover.

  7. Pinch the white clip and pull straight up on the power cord. Remove power cord.
    • Pinch the white clip and pull straight up on the power cord.

    • Remove power cord.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mira Patel

Member since: 10/11/2016

574 Reputation

5 Guides authored

Team

USF Tampa, Team 1-2, Leahy Fall 2016 Member of USF Tampa, Team 1-2, Leahy Fall 2016

USFT-LEAHY-F16S1G2

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 112