Introduction

This guide will teach how to remove and replace the disk tray.

Parts

No parts required.

Use the Phillips Head #2 screwdriver to remove the three 10mm screws on the back panel.
  • Use the Phillips Head #2 screwdriver to remove the three 10mm screws on the back panel.

Use the plastic spudger to pry open the top panel. Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel. Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.
  • Use the plastic spudger to pry open the top panel.

    • Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Pull the ribbons gently from one corner by the blue tabs to remove it. Pull the ribbons gently from one corner by the blue tabs to remove it.
  • Pull the ribbons gently from one corner by the blue tabs to remove it.

Remove the two 7.5 screws on both sides of the disk tray with Phillips Head #2 screwdriver.
  • Remove the two 7.5 screws on both sides of the disk tray with Phillips Head #2 screwdriver.

Push two small prongs on both sides inwards and push forward. Remove the disk tray.
  • Push two small prongs on both sides inwards and push forward.

  • Remove the disk tray.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mira Patel

Member since: 10/11/2016

562 Reputation

5 Guides authored

Team

USF Tampa, Team 1-2, Leahy Fall 2016 Member of USF Tampa, Team 1-2, Leahy Fall 2016

USFT-LEAHY-F16S1G2

3 Members

5 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 91