What you need
-
-
Unscrew the two phillips head screws. Use the reversible screwdriver that came with the car.
-
-
-
Pull the cover up and slightly to the right.
-
Here we have to replace the filter. Lift the filter up. It comes off without difficulty.
-
-
-
-
Clean all of the rubbish and insects that are inside.
-
Place the new filter, fitting the rubber contour with the gap.
-
-
-
Fit the two tabs in their places.
-
Once you've done that, put the two screws into their places and tightly screw them in. Finally, check to see that they are completely screwed in.
-
Cancel: I did not complete this guide.
5 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
