Fix Your Stuff Community Store

RotoZip Rebel REB01 Type 2 Saw Casing Removal.

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. RotoZip Rebel REB01 Type 2 Saw Casing Removal., Saw Casing: step 1, image 1 of 1

    • Unplug the saw before attempting any of the replacement guides.

    • Orient the saw so that the handle is closest to you and the saw end points towards the left.

    Edit

  2. RotoZip Rebel REB01 Type 2 Saw Casing Removal.: step 2, image 1 of 2 RotoZip Rebel REB01 Type 2 Saw Casing Removal.: step 2, image 2 of 2

    • Push down on the grey lock on the right side of the handle to unlock it.

    • Pull the handle to detach it from the saw.

    Edit

  4. RotoZip Rebel REB01 Type 2 Saw Casing Removal.: step 3, image 1 of 2 RotoZip Rebel REB01 Type 2 Saw Casing Removal.: step 3, image 2 of 2

    • Lift the black lock at the tip of the saw to unlock the depth gauge.

    • Pull the depth gauge to detach it from the saw.

    Edit

  5. RotoZip Rebel REB01 Type 2 Saw Casing Removal.: step 4, image 1 of 1

    • Rotate the device so that the bottom of the saw is facing upwards.

    • Remove the six 20mm screws with a 6mm flathead screwdriver.

    Edit

  6. RotoZip Rebel REB01 Type 2 Saw Casing Removal.: step 5, image 1 of 2 RotoZip Rebel REB01 Type 2 Saw Casing Removal.: step 5, image 2 of 2

    • Cut through the stickers on the right and left sides of the saw using a metal spudger.

    • Pull off the top half of the casing.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Syed Hasan

Member since: 10/06/16

143 Reputation

1 Guide authored

Badges: 7

+4 more badges

Team

Cal Poly, Team 4-4, Livingston Fall 2016 Member of Cal Poly, Team 4-4, Livingston Fall 2016

CPSU-LIVINGSTON-F16S4G4

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 86