Roku 3 Motherboard Replacement

Step 1 Motherboard

• Place the Roku 3 on the table face down and orient it so you can correctly read the writing.
Step 2




• Pull back the rubber protection in the top right corner to locate the screw.
• Repeat with the bottom right corner and bottom left corner.
Step 3
• Remove the 9 mm screws from the three corners with a Hex 1.3 Screwdriver.
Step 4
• Open the device by gently lifting the bottom half away from the top half of the device.
Step 5
• Use your fingers to carefully lift the motherboard from the top half of the device.
Step 6
• Pull away the IO shield from the motherboard using your hands.

Author

with 2 other contributors

Samantha Miller

Member since: 10/06/16

287 Reputation

1 Guide authored

Badges: 8

• 
• 
• 

+5 more badges

Team

Cal Poly, Team 15-2, Livingston Fall 2016 Member of Cal Poly, Team 15-2, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G2

3 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview