Skip to main content

Introduction

Disassembling the handle assembly will be necessary for any rewiring or switch replacement needs. Jammed switches or a damaged power cord will require these preliminary steps for repair.

  1. Using a Torx T20 screwdriver, unscrew  the five M5 x 16 mm screws. Using the T20 screwdriver, remove the M5 x 28 mm screw. Using the T20 screwdriver, remove the M5 x 28 mm screw.
    • Using a Torx T20 screwdriver, unscrew the five M5 x 16 mm screws.

    • Using the T20 screwdriver, remove the M5 x 28 mm screw.

  2. Using a Torx T10 screwdriver, remove the M3 x 10mm  screw.
    • Using a Torx T10 screwdriver, remove the M3 x 10mm screw.

  3. Gently pull off the right side handle. Gently pull off the right side handle.
    • Gently pull off the right side handle.

  4. iPhone Battery Fix Kits

    Only $29.99

    Buy Now

    iPhone Battery Fix Kits

    Only $29.99

    Buy Now
  5. Using a hex head screwdriver, remove the two 8-16 x 1/2in screws. Using a hex head screwdriver, remove the two 8-16 x 1/2in screws. Using a hex head screwdriver, remove the two 8-16 x 1/2in screws.
    • Using a hex head screwdriver, remove the two 8-16 x 1/2in screws.

  6. Gently pull away the bend relief.
    • Gently pull away the bend relief.

  7. Remove the one M4 x 14 mm screw using a Phillips screwdriver. Remove the one M4 x 14 mm screw using a Phillips screwdriver.
    • Remove the one M4 x 14 mm screw using a Phillips screwdriver.

  8. Gently lift away the switch and wires.
    • Gently lift away the switch and wires.

  9. Press down the handle lock button. Force-ably twist and pull away the left side handle assembly.
    • Press down the handle lock button.

    • Force-ably twist and pull away the left side handle assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 10

All Time: 47