Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

Prereq only to remove the audio jack board with the lower case fully removed.

  1. Use a spudger to flip open the ZIF connector retaining flap for the dual microphone assembly ribbon cable. Use a spudger to flip open the ZIF connector retaining flap for the dual microphone assembly ribbon cable.
    • Use a spudger to flip open the ZIF connector retaining flap for the dual microphone assembly ribbon cable.

  2. Use tweezers to pull the  microphone assembly ribbon cable free of its connector. Use tweezers to pull the  microphone assembly ribbon cable free of its connector.
    • Use tweezers to pull the microphone assembly ribbon cable free of its connector.

  3. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  4. Remove the two 3.2 mm T5 Torx screws securing the audio jack board to the case.
    • Remove the two 3.2 mm T5 Torx screws securing the audio jack board to the case.

  5. Remove the audio jack board.
    • Remove the audio jack board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Geoff Wacker

Member since: 09/30/2013

81,100 Reputation

89 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 74