Resetting the SMC of a MacBook Pro 13" Touch Bar 2018
Mattia Tonghini and 2 other contributors
Last updated on Jul 6, 2022
Views: 7.3K
View statistics:
- Past 24 Hours:
- 1
- Past 7 Days:
- 28
- Past 30 Days:
- 102
- All Time:
- 7,288
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓Before resetting the SMC, try these steps:
- Turn off the Mac.
- Press and hold the power button for 10 seconds, then release it.
- Wait a few seconds, then press the power button to turn on the Mac.
-
-
-
Shut down your Mac.
-
On your built-in keyboard, press and hold all of the following keys: Control on the left side of your keyboard, Option (Alt) on the left side of your keyboard, and Shift on the right side of your keyboard. Your Mac might turn on.
-
Keep holding all three keys for 7 seconds, then press and hold the power button as well. If your Mac is on, it will turn off as you hold the keys.
-
Keep holding all four keys for another 7 seconds, then release them.
-
Wait a few seconds, then press the power button to turn on your Mac.
Ask FixBot
-
-
-
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
