Introduction

Make it easier to zip up your favorite jacket by replacing a missing zipper pull tab. It only takes a few minutes and afterward you’ll be able to grib your zipper pull with mittens or gloves.

For replacement parts or further assistance, contact Patagonia Customer Service.

Video Overview

Zipper pull replacement overview.

  1. Get your new zipper pull and position it with the pull-tab down.
    • Get your new zipper pull and position it with the pull-tab down.

    • Lift up the zipper, as if you were pulling the zipper closed.

    Add Comment

  2. Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally.
    • Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally.

    • Pull the zipper pull through the smaller hole.

    Add Comment

    • Rest the zipper back in its normal, hanging position.

    • Take top end of the zipper pull and insert it into the bigger, lower hole in the zipper.

    Add Comment

    • Pull the top of the zipper pull through the hole to create a loop on the backside of the zipper.

    • Bring the zipper pull-tab through the loop.

    Add Comment

    • Pull the zipper pull-tab snug.

    • The zipper pull should now be inserted and lay flat.

    Add Comment

Finish Line

3 other people completed this guide.

Brittany McCrigler

Member since: 03/05/2012

79,871 Reputation

133 Guides authored

Team

iFixit Member of iFixit

Community

114 Members

7,024 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 11

Past 7 Days: 93

Past 30 Days: 294

All Time: 11,150