Introduction

How to remove the keyboard cover.

Remove the 7 mm Philip screws.
  • Remove the 7 mm Philip screws.

  • Remove the 10 mm Philip screws.

  • Remove the 14 mm Philip screw.

Add Comment

Open the flap on the left hand side. Open the flap on the left hand side.
  • Open the flap on the left hand side.

Add Comment

Insert the iPod opening tools between the right and left sides of the latch. Pry the right side  of the latch, and then pry the left side to detach the laptop's cover.
  • Insert the iPod opening tools between the right and left sides of the latch.

  • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

Add Comment

Black Friday
Broken doesn't stand a chance.
Open the flap on the right side. Open the flap on the right side.
  • Open the flap on the right side.

Add Comment

Insert the iPod opening tools towards the right side of the latch.
  • Insert the iPod opening tools towards the right side of the latch.

  • Gently pry the right side out to release the top cover.

Add Comment

Lift the keyboard slowly. A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.
  • Lift the keyboard slowly.

  • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

Add Comment

Use your fingers or a spudger to detach the connector.
  • Use your fingers or a spudger to detach the connector.

Add Comment

Carefully lift and remove the keyboard. Carefully lift and remove the keyboard.
  • Carefully lift and remove the keyboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Derek Driscoll

Member since: 04/15/2010

110 Reputation

16 Guides authored

Team

Cal Poly, Team 26-27, Regan Spring 2010 Member of Cal Poly, Team 26-27, Regan Spring 2010

CPSU-REGAN-S10S26G27

3 Members

18 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 1,424