Replacement Switch for Angle Grinder Dexter UP20

Written By: Antoine Lafillé (and one other contributor)

Comments: 0
Favorites: 0

Replacement Switch for Angle Grinder Dexter UP20

Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Step 1 Switch

Remove the battery and disassemble the Grinding Head.

Step 2

Remove the screws from the body of the tools.

Step 3

Remove the top case. Remove the Switch button, the Immobiliser Trigger and then the Engine.

Step 4

Remove the faulty switch and the electronic part.

Step 5

Assemble the new Switch and electronic components.

Step 6

Re-assemble the Engine by keeping the coals apart.

Step 7

Adjust the position of the wiring. Re-assemble the Immobiliser Trigger and then the Switch Button.

Step 8

Re-assemble the top shell.

Step 9

Re-screw the Upper Shell.

Step 10

Re-assemble the Grinding Head while respecting the deceasers.

Conclusion

To reassemble your device, follow the instructions in reverse order.

Special thanks to these translators:

fr en

100%

HelloMacOS

HelloMacOS is helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

Antoine Lafillé

Member since: 01/30/2020

780 Reputation

5 Guides authored

Team

Leroy Merlin Member of Leroy Merlin

Community

36 Members

223 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 9