Skip to main content

RIDGID R84015 X2 Speed Switch Replacement

What you need

  1. RIDGID R84015 X2 Speed Switch Replacement, RIDGID R84015 X2 Case Removal: step 1, image 1 of 2 RIDGID R84015 X2 Speed Switch Replacement, RIDGID R84015 X2 Case Removal: step 1, image 2 of 2
    • Remove the backplate.

    • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

  2. RIDGID R84015 X2 Speed Switch Replacement: step 2, image 1 of 1
    • Remove the drill handle.

    • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

  3. RIDGID R84015 X2 Speed Switch Replacement: step 3, image 1 of 2 RIDGID R84015 X2 Speed Switch Replacement: step 3, image 2 of 2
    • Remove the gear casing from the body.

    • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

  4. RIDGID R84015 X2 Speed Switch Replacement, Speed Switch: step 4, image 1 of 1
    • Locate small metal bar above plastic part of drill.

    • Attempt to move bar back and forth. If it wont move, try to move it while rotating the chuck. If it still will not move, there is a problem with the gears. For help see the Planetary Gear Replacement Guide

  5. RIDGID R84015 X2 Speed Switch Replacement: step 5, image 1 of 2 RIDGID R84015 X2 Speed Switch Replacement: step 5, image 2 of 2
    • If the bar moves, next check the small plastic switch that is numbered 1 and 2.

    • Make sure the small tabs on the underside of the switch that move the bar are intact.

    • Replace switch as needed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Evan Long

Member since: 04/15/10

262 Reputation

4 Guides authored

Team

Cal Poly, Team 15-48, Garner Spring 2010 Member of Cal Poly, Team 15-48, Garner Spring 2010

CPSU-GARNER-S10S15G48

6 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 8

All Time: 3,604