Introduction

This guide will demonstrate how to access the R1's speakers and reattach them to the motherboard.

Parts

No parts required.

Image 1/1: Gently pry the back cover of the R1 from the the front by using the spudger along the edges.
  • Insert your plastic spudger into the opening near the HDMI port.

  • Gently pry the back cover of the R1 from the the front by using the spudger along the edges.

    • Do not pull the back cover straight off the R1. You may further damage the cables connecting the speakers to the motherboard.

Add Comment

Image 1/1: This will prevent further damage to the cables connecting the speakers to the motherboard.
  • Lay the R1 flat like an open book.

    • This will prevent further damage to the cables connecting the speakers to the motherboard.

Add Comment

Image 1/2: Do not allow solder from one nodule to touch another nodule. This will cause the speakers to malfunction. Image 2/2: Solder the black cable of the Right speaker to the nodule marked R+ on the motherboard.
  • Solder the black cable of the left speaker to the nodule marked L+ on the motherboard.

    • Do not allow solder from one nodule to touch another nodule. This will cause the speakers to malfunction.

  • Solder the black cable of the Right speaker to the nodule marked R+ on the motherboard.

  • Solder the red cable of the left speaker to the nodule marked L- on the motherboard.

  • Solder the red cable of the right speaker to the nodule marked R- on the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Christopher Rosario

Member since: 02/17/2015

411 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 82