Fix Your Stuff Community Store

Palm Treo 600 Speaker Replacement

Introduction

Replace the speaker

What you need

  1. Palm Treo 600 Speaker Replacement, Back Case: step 1, image 1 of 1

    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

    Edit

  2. Palm Treo 600 Speaker Replacement: step 2, image 1 of 2 Palm Treo 600 Speaker Replacement: step 2, image 2 of 2

    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

    Edit

  4. Palm Treo 600 Speaker Replacement: step 3, image 1 of 2 Palm Treo 600 Speaker Replacement: step 3, image 2 of 2

    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

    Edit

  5. Palm Treo 600 Speaker Replacement, Speaker: step 4, image 1 of 1

    • Using the spudger, pull the speaker straight up.

    Edit

  6. Palm Treo 600 Speaker Replacement: step 5, image 1 of 1

    • Gently pull the rubber coating off of the speaker.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 4 other contributors

Clement Poisson

Member since: 01/26/10

24 Reputation

7 Guides authored

Badges: 8

+5 more badges

Team

Cal Poly, Team 13-23, Maness Winter 2010 Member of Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Members

16 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 1

All Time: 1,498