Introduction

Remove two screws, gently pry away cover and readjust your slider button. Easy!

Parts

No parts required.

Image 1/1:
  • Remove screws on strap panel of camera.

Add Comment

Image 1/1: Now readjust the slider button so that it is in the correct position. (You will know this works, if the button will freely move once the cover is on)
  • After removing the two screws on your strap plate, gently pry away the back cover of your camera.

  • Now readjust the slider button so that it is in the correct position. (You will know this works, if the button will freely move once the cover is on)

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Stanley

Member since: 01/30/2011

360 Reputation

4 Guides authored

Team

Cal Poly, Team 4-33, Regan Winter 2011 Member of Cal Poly, Team 4-33, Regan Winter 2011

CPSU-REGAN-W11S4G33

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 8

All Time: 4,058