Before you start, turn off your player.
  • Before you start, turn off your player.

Add Comment

Unscrew the two Phillips screws on the back of the drive. Unscrew the two Phillips screws on the back of the drive.
  • Unscrew the two Phillips screws on the back of the drive.

Add Comment

Use a plastic opening tool to pry on the edges of the drive. Once the cover is detached from the front panel of the player, be careful not to lose the volume key.
  • Use a plastic opening tool to pry on the edges of the drive.

  • Once the cover is detached from the front panel of the player, be careful not to lose the volume key.

  • Also be careful not to lose the small room below the Hold switch (see image 2)

Add Comment

Remove the single Phillips screw that holds the front panel and the interior components of the drive.
  • Remove the single Phillips screw that holds the front panel and the interior components of the drive.

Add Comment

The interior components of the reader are held by 4 plastic clips. Be careful not to break them by removing the display assembly, battery and the motherboard. Be careful not to break them by removing the display assembly, battery and the motherboard.
  • The interior components of the reader are held by 4 plastic clips.

  • Be careful not to break them by removing the display assembly, battery and the motherboard.

Add Comment

Remove the 5-way navigation key.
  • Remove the 5-way navigation key.

Add Comment

Conclusion

To reassemble your device, follow the instructions in reverse order.

Special thanks to these translators:

100%

Israel is helping us fix the world! Want to contribute?
Start translating ›

Dina Rafanomezantsoa

Member since: 05/06/2016

2,282 Reputation

2 Guides authored

Team

iFixit EU Team Member of iFixit EU Team

Community

32 Members

492 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 120