Fix Your Stuff Community Store

Kurio Touch 4S Screen Replacement

Introduction

This guide will show you how to replace your broken screen.

What you need

  1. Kurio Touch 4S Screen Replacement, Screen: step 1, image 1 of 1

    • Make sure to open the back cover easily using the plastic opening tool

    Edit

  2. Kurio Touch 4S Screen Replacement: step 2, image 1 of 3 Kurio Touch 4S Screen Replacement: step 2, image 2 of 3 Kurio Touch 4S Screen Replacement: step 2, image 3 of 3

    • Remove back cover by prying away from the Kurio.

    • The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

    Edit

  3. Kurio Touch 4S Screen Replacement: step 3, image 1 of 2 Kurio Touch 4S Screen Replacement: step 3, image 2 of 2

    • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the Philips#1 Screwdriver.

    Edit

  4. Kurio Touch 4S Screen Replacement: step 4, image 1 of 1

    • After you remove your four 5mm Phillips screws, use your plastic opening tool to help you open the plastic cover of your device.

    • All these screws are identical so don't worry if you get them out of order.

    Edit

  5. Kurio Touch 4S Screen Replacement: step 5, image 1 of 1

    • Remove the plastic cover that is covering the camera area.

    Edit

  7. Kurio Touch 4S Screen Replacement: step 6, image 1 of 1

    • Separate the two halves of your Kurio Touch 4S and lay them besides each other.

    Edit

  8. Kurio Touch 4S Screen Replacement: step 7, image 1 of 1

    • Use Phillips # 1 screw to open the 4 screws on the motherboard.

    • Open the screws gently and do not apply too much force as you could damage the motherboard.

    Edit

  9. Kurio Touch 4S Screen Replacement: step 8, image 1 of 1

    • Use the plastic opener to remove the battery.

    Edit

  10. Kurio Touch 4S Screen Replacement: step 9, image 1 of 1

    • Use tweezers to remove the black tape that is attached to the motherboard.

    Edit

  11. Kurio Touch 4S Screen Replacement: step 10, image 1 of 2 Kurio Touch 4S Screen Replacement: step 10, image 2 of 2

    • Detach all the wire that are connected to the motherboard.

    • Also remove the camera module and other components that are attached to the motherboard.

    • For more information on soldering Click here

    Edit

  12. Kurio Touch 4S Screen Replacement: step 11, image 1 of 1

    • Remove the motherboard with the help of plastic opener.

    • Detach the power plug before you remove the motherboard.

    Edit

  13. Kurio Touch 4S Screen Replacement: step 12, image 1 of 1

    • Use the Plastic opener to remove the screen.

    • Do not apply too much pressure as the front cover could be damaged.

    Edit

  14. Kurio Touch 4S Screen Replacement: step 13, image 1 of 1

    • Use the soldering tool to remove the wire that is attached to the screen & the motherboard.

    Edit

  15. Kurio Touch 4S Screen Replacement: step 14, image 1 of 1

    • Use tweezers to remove the screen from your Kurio Toich 4S.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Author

with 3 other contributors

Ali

Member since: 01/21/15

184 Reputation

1 Guide authored

Badges: 8

+5 more badges

Team

USF Tampa, Team 6-5, Brown Winter 2015 Member of USF Tampa, Team 6-5, Brown Winter 2015

USFT-BROWN-W15S6G5

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 1,369