Fix Your Stuff Community Store

Removing the Solenoid Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Removing the Solenoid Replacement, Removing the Solenoid from the Body: step 1, image 1 of 1

    • Gently use tweezers to detach the white vision wire harness, located directly under the feed tube.

    • Another small tool or your fingers will work for this.

    Edit

  2. Removing the Solenoid Replacement: step 2, image 1 of 1

    • Remove the two 1-1/4" screws on either side of the circuit board using a 3/32" allen wrench.

    Edit

  4. Removing the Solenoid Replacement: step 3, image 1 of 1

    • Separate the solenoid from the gun's body by gently pulling it upwards.

    Edit

  5. Removing the Solenoid Replacement: step 4, image 1 of 1

    • Slide the metal body out of the plastic shell by holding one in each hand and gently pulling apart.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 5 other contributors

Shane Villalpando

Member since: 02/02/15

1,031 Reputation

10 Guides authored

Badges: 10

+7 more badges

Team

Cal Poly, Team 8-42, Amido Winter 2015 Member of Cal Poly, Team 8-42, Amido Winter 2015

CPSU-AMIDO-W15S8G42

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 54