Fix Your Stuff Community Store

Removing the Olympus Stylus 410 Outer Case

Introduction

Use this guide to remove the camera's outer case in order to gain access to and repair other parts.

What you need

  1. Removing the Olympus Stylus 410 Outer Case, Slider: step 1, image 1 of 1

    • Locate the 2 screws on the bottom of the slider.

    • Remove both screws with a #00 Phillips screwdriver.

    Edit

  2. Removing the Olympus Stylus 410 Outer Case: step 2, image 1 of 1

    • Gently pull on the bottom of the slider until it comes off the lower track.

    • There is a little piece that connects the slider to the track. Be sure not to lose this as it is needed to put the slider back on.

    Edit

  3. Removing the Olympus Stylus 410 Outer Case: step 3, image 1 of 1

    • Lift the slider up until it comes off the upper track.

    Edit

  4. Removing the Olympus Stylus 410 Outer Case: step 4, image 1 of 1

    • The slider should now be free from the body of the camera.

    Edit

  6. Removing the Olympus Stylus 410 Outer Case, Outer Case: step 5, image 1 of 3 Removing the Olympus Stylus 410 Outer Case, Outer Case: step 5, image 2 of 3 Removing the Olympus Stylus 410 Outer Case, Outer Case: step 5, image 3 of 3

    • Locate the 3 screws on the outer metal band and remove them with a #00 Phillips screwdriver.

    Edit

  7. Removing the Olympus Stylus 410 Outer Case: step 6, image 1 of 2 Removing the Olympus Stylus 410 Outer Case: step 6, image 2 of 2

    • Use the spudger to peel off the outer metal band, starting from the bottom of the camera.

    • The metal band it attached to the camera with glue in addition to screws. Be careful not to bend the band when removing it from the camera.

    Edit

  8. Removing the Olympus Stylus 410 Outer Case: step 7, image 1 of 2 Removing the Olympus Stylus 410 Outer Case: step 7, image 2 of 2

    • The shutter button can now be removed. It is not connected to the camera and can be lifted off.

    Edit

  9. Removing the Olympus Stylus 410 Outer Case: step 8, image 1 of 2 Removing the Olympus Stylus 410 Outer Case: step 8, image 2 of 2

    • Remove the memory card.

    • Locate and remove the 2 screws using a #00 Phillips screwdriver.

    Edit

  10. Removing the Olympus Stylus 410 Outer Case: step 9, image 1 of 3 Removing the Olympus Stylus 410 Outer Case: step 9, image 2 of 3 Removing the Olympus Stylus 410 Outer Case: step 9, image 3 of 3

    • Use a spudger around the edge of the case to loosen it.

    • Carefully wiggle the back case off. This may require a fair amount of force.

    Edit

  11. Removing the Olympus Stylus 410 Outer Case: step 10, image 1 of 1

    • Locate the 3 internal screws holding on the front of the case. Remove them with a #00 Phillips screwdriver.

    Edit

  12. Removing the Olympus Stylus 410 Outer Case: step 11, image 1 of 2 Removing the Olympus Stylus 410 Outer Case: step 11, image 2 of 2

    • While grasping the interior and the front case, gently pull until they start to come apart. Some light wiggling may be required.

    • Be careful not to completely pull the front case off because it will still be connected with wires.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 7 other contributors

Jared Ruekberg

Member since: 04/15/10

33 Reputation

2 Guides authored

Badges: 6

+3 more badges

Team

Cal Poly, Team 6-13, Maness Spring 2010 Member of Cal Poly, Team 6-13, Maness Spring 2010

CPSU-MANESS-S10S6G13

5 Members

17 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 2,532