Introduction

This is the initial step in any repair guide. It is simple, quick, and will only take a few minutes.

Parts

No parts required.

Place the computer monitor face down on a safe, harmless surface. Using a  Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.
  • Place the computer monitor face down on a safe, harmless surface.

  • Using a Phillips #00 screw driver, remove the four 6.86 mm screws from the metal plate.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the metal plate from bottom of the iMac G4.
  • Remove the metal plate from bottom of the iMac G4.

  • The four screws do not completely separate from the metal plate.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Elliot Freerks

Member since: 10/04/2011

635 Reputation

3 Guides authored

Team

Cal Poly, Team 5-32, Amido Fall 2011 Member of Cal Poly, Team 5-32, Amido Fall 2011

CPSU-AMIDO-F11S5G32

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 13

All Time: 2,772