Parts

No parts required.

  1. Remove the teflon tape from the bottom of the mouse with a spudger.
    • Remove the teflon tape from the bottom of the mouse with a spudger.

  2. Remove the four screws with the Phillips head #00 screwdriver.
    • Remove the four screws with the Phillips head #00 screwdriver.

    • Gently pull on the top plastic plate of the device and carefully unplug the white cord from the circuit board.

    • Gently pull up on the two side plastic plates.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

0 Comments

View Statistics:

Past 24 Hours: 13

Past 7 Days: 84

Past 30 Days: 339

All Time: 6,831