Fix Your Stuff Community Store

Razer Blade Stealth 2017 HDMI and USB-A Port Replacement

Introduction

This guide outlines how to replace the HDMI and USB-A port module in the Razer Blade Stealth 2017. When and external device is connected to the HDMI port, if the external device is not displaying audio or visual feed, the HDMI may be broken. The HDMI and USB-A module is located on the right-hand side of the computer, and often experience issues with loose ports and external device communication. Some tools are required for this replacement.

What you need

  1. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement, Battery: step 1, image 1 of 2 Razer Blade Stealth 2017 HDMI and USB-A Port Replacement, Battery: step 1, image 2 of 2

    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Use a Torx T5 screwdriver to remove the eight, 3mm screws on the bottom cover of the laptop.

    • Whenever you remove screws from the device, remember to save and label them.

    Edit

  2. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 2, image 1 of 1

    • Remove the bottom cover of the laptop by sliding it away from the hinge.

    • Do not force the cover up!

    Edit

  3. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 3, image 1 of 2 Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 3, image 2 of 2

    • Use your fingernail to pry up and disconnect the battery from the motherboard.

    Edit

  5. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 4, image 1 of 1

    • Use a Phillips #00 screwdriver to remove the six, 5mm screws securing the battery.

    Edit

  6. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 5, image 1 of 2 Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 5, image 2 of 2

    • Remove any tape attached to the battery.

    • Use the plastic spudger to pry out the battery.

    Edit

  7. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement, HDMI and USB-A Port: step 6, image 1 of 2 Razer Blade Stealth 2017 HDMI and USB-A Port Replacement, HDMI and USB-A Port: step 6, image 2 of 2

    • Use a plastic spudger to lift up the press-fit interconnect cable and expose the USB-A and HDMI port module.

    Edit

  8. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 7, image 1 of 2 Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 7, image 2 of 2

    • Use tweezers to squeeze the fan's white header.

    • Disconnect the fan connector by sliding it out toward the rear of the chassis.

    Edit

  9. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 8, image 1 of 2 Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 8, image 2 of 2

    • Use a Phillips #00 screwdriver to remove the two, 3mm screws from the USB-A and HDMI port module.

    Edit

  10. Razer Blade Stealth 2017 HDMI and USB-A Port Replacement: step 9, image 1 of 1

    • Use a plastic spudger to remove the USB-A and HDMI port module from the case.

    • Do not damage the interconnect cable during removal!

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 6 other contributors

Helene Willits

Member since: 10/10/19

762 Reputation

6 Guides authored

Badges: 10

+7 more badges

Team

Cal Poly, Team S11-G3, Regan Fall 2019 Member of Cal Poly, Team S11-G3, Regan Fall 2019

CPSU-REGAN-F19S11G3

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 1,093