Skip to main content

Introduction

Prerequisite only

Tools

Parts

No parts specified.

  1. Maneuver the RIDGID saw, in order to easily remove the upper blade guard assembly. Using the T20 Torx Screwdriver, remove the four 4/10 cm screws that attach to the gear box. Using the T20 Torx Screwdriver, remove the four 4/10 cm screws that attach to the gear box.
    • Maneuver the RIDGID saw, in order to easily remove the upper blade guard assembly.

    • Using the T20 Torx Screwdriver, remove the four 4/10 cm screws that attach to the gear box.

  2. Using the T50 Torx Screwdriver, remove the one 5/10 screw that attach to the gear box. Using the T50 Torx Screwdriver, remove the one 5/10 screw that attach to the gear box.
    • Using the T50 Torx Screwdriver, remove the one 5/10 screw that attach to the gear box.

  3. Using the T20 Torx Screwdriver, remove the two 4/10 cm screws that attach to the handle of the device. Using the T20 Torx Screwdriver, remove the two 4/10 cm screws that attach to the handle of the device.
    • Using the T20 Torx Screwdriver, remove the two 4/10 cm screws that attach to the handle of the device.

  4. Maneuver the saw to get to the base plate. Using the T20 Torx Screwdriver, remove the two 4/10 cm screws that attach the upper blade guard’s base plate to the main housing assembly.
    • Maneuver the saw to get to the base plate.

    • Using the T20 Torx Screwdriver, remove the two 4/10 cm screws that attach the upper blade guard’s base plate to the main housing assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Lucas Pimentel

Member since: 04/02/2019

1,010 Reputation

8 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 25